Photo of Dr. Arun Tej Mallajosyula

People · Faculty

Dr. Arun Tej Mallajosyula

Associate Professor

Perovskite and organic devices: memories, solar cells and light emitters

Arun Tej Mallajosyula is an Associate Professor in the Department of Electronics and Electrical Engineering and the Centre for Nanotechnology at IIT Guwahati. He leads the Nanoelectronics and Semiconductor Devices Group (NSDG).

The research of the group extends from material growth and device fabrication to defect spectroscopy, device simulation and circuit design. Current work addresses flexible perovskite memristors and crossbar memories for neuromorphic computing, lead-free and tandem perovskite solar cells, perovskite light-emitting diodes, single-nanowire devices and supercapacitors. The group is also extending its research to semiconductor packaging and heterogeneous integration.

Research interests

  • Artificial synapses and neuromorphic computing
  • Emerging memories and crossbar ReRAMs
  • Nano-scale device modelling
  • Photovoltaics and supercapacitors
  • Flexible, wearable and organic electronics
  • Semiconductor packaging and heterogeneous integration

Background

  • PhD, Indian Institute of Technology Kanpur
  • Research Associate, Los Alamos National Laboratory, USA (2013–2015)
  • Research Fellow, National University of Singapore (2013)
  • Principal Engineer, Taiwan Semiconductor Manufacturing Company (TSMC), Taiwan (2011–2012)

Service

  • Chair, IEEE Electron Devices Society, Guwahati Chapter
  • Reviewer for Nano Energy, Nano Letters, Materials Today Electronics, ACS Applied Electronic Materials, IEEE Transactions on Electron Devices, Scientific Reports, Langmuir, Thin Solid Films, Applied Physics A, Surfaces and Interfaces, and Materials & Design

Publications with this group

  1. Integrating dimensional engineering and optical management for high-performance lead-free all-perovskite tandem solar cells A. Purkayastha, A. T. Mallajosyula Solar Energy Materials and Solar Cells 297, 114100 (2026) · doi:10.1016/j.solmat.2025.114100
  2. Multiscale dielectric relaxation and trap-assisted conduction in halide perovskite light-emitting diodes A. Baruah, A. T. Mallajosyula Journal of Physics D: Applied Physics 59, 015112 (2026) · doi:10.1088/1361-6463/ae27de
  3. Giant polarization facilitating ion migration in perovskite light emitting diodes: implications for performance degradation A. Baruah, H. J. Gogoi, A. T. Mallajosyula Journal of Physics D: Applied Physics 58, 205105 (2025) · doi:10.1088/1361-6463/adcd82
  4. Nitrogen plasma-induced conductivity enhancement of a single CuO nanowire J. Pati, P. Dobbidi, A. T. Mallajosyula Journal of Applied Physics 138, 024302 (2025) Open access · doi:10.1063/5.0261371
  5. Efficient and accurate modeling of double-gate MOSFETs: a computationally feasible approach for potential, subthreshold, and drain current characteristics R. U. Ahmed, A. T. Mallajosyula Physica Scripta 100, 085414 (2025) · doi:10.1088/1402-4896/adf5f6
  6. Artificial synapse using flexible and air-stable Cs₃Bi₂I₉ perovskite memristors R. Yumlembam, H. J. Gogoi, R. P. Palathinkal, A. T. Mallajosyula Flexible and Printed Electronics 10, 015007 (2025) · doi:10.1088/2058-8585/adacf9
  7. Performance of 2-D/3-D mixed-dimension tin perovskite solar cells and their prospects under bifacial configuration A. Purkayastha, A. T. Mallajosyula IEEE Journal of Photovoltaics 15(1), 54–60 (2025) · doi:10.1109/JPHOTOV.2024.3497135
  8. Efficiency enhancement and life cycle assessment of 2D/3D mixed-dimensional tin perovskite plasmonic solar cells A. Purkayastha, M. Minz, R. K. Sonkar, A. T. Mallajosyula ACS Applied Electronic Materials 6(2), 737–747 (2024) · doi:10.1021/acsaelm.3c01166
  9. Unraveling trap distribution in perovskite films: a qualitative analysis via diffusion to drift transition voltage of current–voltage characteristics A. B. Andrabi, A. T. Mallajosyula Solar Energy 264, 112020 (2023) · doi:10.1016/j.solener.2023.112020
  10. Hybrid perovskite-based flexible and stable memristor by complete solution process for neuromorphic computing M. Patel, D. D. Kumbhar, J. Gosai, M. R. Sekhar, A. T. Mallajosyula, A. Solanki Advanced Electronic Materials 9(4), 2200908 (2023) Collaboration with PDEU · doi:10.1002/aelm.202200908
  11. Multifunctional bipolar and complementary resistive switching in HOIP memristors by the control of compliance current H. J. Gogoi, A. T. Mallajosyula ACS Applied Electronic Materials 4(3), 1039–1046 (2022) · doi:10.1021/acsaelm.1c01200
  12. Advances in flexible memristors with hybrid perovskites H. J. Gogoi, K. Bajpai, A. T. Mallajosyula, A. Solanki The Journal of Physical Chemistry Letters 12(36), 8798–8825 (2021) Perspective · doi:10.1021/acs.jpclett.1c02105
  13. Enhancing the switching performance of CH₃NH₃PbI₃ memristors by the control of size and characterization parameters H. J. Gogoi, A. T. Mallajosyula Advanced Electronic Materials 7(11), 2100472 (2021) · doi:10.1002/aelm.202100472
  14. Effect of various interlayers on the performance of cesium formamidinium lead mixed halide (CsFAPbX₃) – formamidinium tin iodide (FASnI₃) two-terminal tandem solar cell A. Purkayastha, A. T. Mallajosyula Solar Energy 228, 523–530 (2021) · doi:10.1016/j.solener.2021.09.046
  15. Optical modelling of tandem solar cells using hybrid organic-inorganic tin perovskite bottom sub-cell A. Purkayastha, A. T. Mallajosyula Solar Energy 218, 251–261 (2021) · doi:10.1016/j.solener.2021.01.054
  16. A comparative study on the forming methods of chalcogenide memristors to optimize the resistive switching performance H. J. Gogoi, A. T. Mallajosyula Journal of Physics D: Applied Physics 53, 445108 (2020) · doi:10.1088/1361-6463/aba56e
  17. Critical role of the sorting polymer in carbon nanotube-based minority carrier devices A. T. Mallajosyula, W. Nie, G. Gupta, J. L. Blackburn, S. K. Doorn, A. D. Mohite ACS Nano 10 (12), 10808–10815 (2016) · doi:10.1021/acsnano.6b04885
  18. Mechanical integrity of solution-processed perovskite solar cells N. Rolston, B. L. Watson, C. D. Bailie, M. D. McGehee, J. P. Bastos, R. Gehlhaar, J.-E. Kim, D. Vak, A. T. Mallajosyula, G. Gupta, A. D. Mohite, R. H. Dauskardt Extreme Mechanics Letters 9, 353–358 (2016) · doi:10.1016/j.eml.2016.06.006
  19. Large-area hysteresis-free perovskite solar cells via temperature controlled doctor blading under ambient environment A. T. Mallajosyula, K. Fernando, S. Bhatt, A. Singh, B. W. Alphenaar, J.-C. Blancon, W. Nie, G. Gupta, A. D. Mohite Applied Materials Today 3, 96–102 (2016) · doi:10.1016/j.apmt.2016.03.002
  20. High-energy density nanofiber-based solid-state supercapacitors D. W. Lawrence, C. Tran, A. T. Mallajosyula, S. K. Doorn, A. Mohite, G. Gupta, V. Kalra Journal of Materials Chemistry A 4 (1), 160–166 (2016) · doi:10.1039/c5ta05552k
  21. Charge transport in polythiophene:fullerene:nanotube bulk heterojunction photovoltaic devices investigated by impedance spectroscopy A. T. Mallajosyula, S. S. K. Iyer, B. Mazhari Current Applied Physics 13 (4), 677–683 (2013) · doi:10.1016/j.cap.2012.11.007
  22. Capacitance–voltage characteristics of P3HT:PCBM bulk heterojunction solar cells with ohmic contacts and the impact of single walled carbon nanotubes on them A. T. Mallajosyula, S. S. K. Iyer, B. Mazhari Organic Electronics 13 (7), 1158–1165 (2012) · doi:10.1016/j.orgel.2012.03.018
  23. Increasing the efficiency of charge extraction limited poly-(3-hexylthiophene):[6,6] phenyl C61 butyric acid methyl ester solar cells using single walled carbon nanotubes with metallic characteristics A. T. Mallajosyula, S. S. K. Iyer, B. Mazhari Journal of Applied Physics 109 (12), 124908 (2011) · doi:10.1063/1.3598081
  24. Role of single walled carbon nanotubes in improving the efficiency of poly-(3-hexylthiophene) based organic solar cells A. T. Mallajosyula, S. S. K. Iyer, B. Mazhari Journal of Applied Physics 108 (9), 094902 (2010) · doi:10.1063/1.3493067
  25. Characterization of matrix and isolated organic solar cells A. T. Mallajosyula, N. Srivastava, S. S. K. Iyer, B. Mazhari Solar Energy Materials and Solar Cells 94 (8), 1319–1323 (2010) · doi:10.1016/j.solmat.2008.09.027
  26. A comparative study of poly(3-octylthiophene) and poly(3-hexylthiophene) solar cells blended with single walled carbon nanotubes A. T. Mallajosyula, S. S. K. Iyer, B. Mazhari Japanese Journal of Applied Physics 48 (1R), 011503 (2009) · doi:10.1143/JJAP.48.011503
  27. Photovoltaic effect in single-layer organic solar cell devices fabricated with two new imidazolin-5-one molecules V. Jain, B. K. Rajbongshi, A. T. Mallajosyula, G. Bhattacharjya, S. S. K. Iyer, G. Ramanathan Solar Energy Materials and Solar Cells 92 (9), 1043–1046 (2008) · doi:10.1016/j.solmat.2008.02.039
  28. Trap-mediated ionic dynamics in MAPbBr₃ PeLEDs revealed by modulus and deep-level transient spectroscopies A. Baruah, A. T. Mallajosyula 10th IEEE Electron Devices Technology & Manufacturing Conference (EDTM) (2026) · doi:10.1109/EDTM65772.2026.11496963
  29. Energy-efficient pore-confined phase change memory using current-crowding effect: a simulation study R. U. Ahmed, A. T. Mallajosyula, B. Saini, U. Ganguly VLSI Design and Test (VDAT), Springer CCIS 459–472 (2026) · doi:10.1007/978-3-032-26305-6_36
  30. Multiscale dielectric relaxation in MAPbBr₃ based perovskite light-emitting diodes A. Baruah, A. T. Mallajosyula IEEE Latin American Conference on Nanotechnology (LANANO) 123–128 (2025) · doi:10.1109/LANANO68466.2025.11512587
  31. Quantifying ionic dynamics in MAPbBr₃ PeLEDs: modulus peaks, split Arrhenius kinetics, and correlated barrier hopping transport A. Baruah, A. T. Mallajosyula IEEE International Conference on Emerging Electronics (ICEE) (2025) · doi:10.1109/ICEE67165.2025.11409695
  32. Effect of phenylethylammonium iodide incorporation on the performance of tin-based perovskite solar cells A. Purkayastha, A. T. Mallajosyula IEEE 53rd Photovoltaic Specialists Conference (PVSC) 1721–1723 (2025) · doi:10.1109/PVSC59419.2025.11132971
  33. Optical modelling of solution processed all-perovskite triple junction solar cells A. Purkayastha, A. T. Mallajosyula IEEE 52nd Photovoltaic Specialists Conference (PVSC) 899–901 (2024) · doi:10.1109/PVSC57443.2024.10749552
  34. Performance of bifacial lead-free all-perovskite tandem solar cell for indoor applications A. Purkayastha, A. T. Mallajosyula ICAER 2023, Advances in Clean Energy and Sustainability (Springer) 555–563 (2024) Best Paper Award · doi:10.1007/978-981-97-5415-1_46
  35. Optical modelling of lead-free all-OIHP tandem solar cell A. Purkayastha, A. T. Mallajosyula XXII International Workshop on Physics of Semiconductor Devices (IWPSD), IIT Madras (2023)
  36. Influence of spectral albedo on the performance of lead-free perovskite bifacial tandem solar cell A. Purkayastha, A. T. Mallajosyula IEEE 50th Photovoltaic Specialists Conference (PVSC) (2023) · doi:10.1109/PVSC48320.2023.10359550
  37. Effect of spectral albedo on bifacial 2D/3D tin perovskite solar cells under concurrent illumination A. Purkayastha, A. T. Mallajosyula 6th IEEE International Conference on Emerging Electronics (ICEE), Bengaluru (2022)
  38. Ionic defect analysis in flexible hybrid perovskite memristor using deep level transient spectroscopy H. J. Gogoi, A. B. Andrabi, M. R. Sekhar, A. T. Mallajosyula IEEE International Flexible Electronics Technology Conference (IFETC) (2022) · doi:10.1109/IFETC53656.2022.9948530
  39. Investigation of lead-free 2D/3D mixed-dimensional tin perovskite solar cell embedded with plasmonic metal nanoparticles A. Purkayastha, M. Minz, R. K. Sonkar, A. T. Mallajosyula IEEE 49th Photovoltaics Specialists Conference (PVSC) 504–506 (2022) · doi:10.1109/PVSC48317.2022.9938955
  40. Effect of active layer thickness and angle of incidence on the efficiency of planar heterojunction lead-free tin perovskite solar cell A. Purkayastha, A. T. Mallajosyula IEEE 48th Photovoltaic Specialists Conference (PVSC) 1236–1239 (2021) · doi:10.1109/PVSC43889.2021.9518909
  41. Photocurrent loss analysis of series connected tandem solar cells based on hybrid tin perovskites, kesterites, and semiconducting polymers A. Purkayastha, A. T. Mallajosyula 5th IEEE International Conference on Emerging Electronics (ICEE) (2020) · doi:10.1109/ICEE50728.2020.9776944
  42. Effect of antisolvent method on the performance of HOIP based memristive devices H. J. Gogoi, A. Solanki, A. T. Mallajosyula 4th IEEE International Conference on Emerging Electronics (ICEE) (2018) · doi:10.1109/ICEE44586.2018.8937971
  43. Role of single walled carbon nanotubes in improving the efficiency of P3HT:PCBM solar cells: impedance spectroscopy and morphology studies A. T. Mallajosyula, S. S. K. Iyer, B. Mazhari 35th IEEE Photovoltaic Specialists Conference (PVSC) 95–101 (2010) · doi:10.1109/PVSC.2010.5614483
  44. Enhanced performance of poly-3(hexylthiophene)-single walled carbon nanotube bulk heterojunction solar cells using a poly-3(hexylthiophene) buffer layer and Ca electrode A. T. Mallajosyula, S. S. K. Iyer, B. Mazhari 34th IEEE Photovoltaic Specialists Conference (PVSC) 748–753 (2009) · doi:10.1109/PVSC.2009.5411176
  45. Conduction properties of carbon nanotubes in P3HT:SWNT bulk heterojunction solar cells A. T. Mallajosyula, S. S. K. Iyer, B. Mazhari 33rd IEEE Photovoltaic Specialists Conference (PVSC) 1–6 (2008) · doi:10.1109/PVSC.2008.4922722
  46. Effect of single walled carbon nanotubes on the performance of poly-(3-hexylthiophene) solar cell A. T. Mallajosyula, S. S. K. Iyer, B. Mazhari 2nd IEEE International Nanoelectronics Conference (INEC) 550–554 (2008) · doi:10.1109/INEC.2008.4585547
  47. Charge transport in methyl ammonium lead tri-bromide perovskite light emitting diodes A. Baruah, A. T. Mallajosyula 2nd International Conference on Low-Energy Digital Devices and Computing (ICLED), Singapore (2024)
  48. Lead-free all-inorganic perovskite memristor by thermal evaporation R. Yumlembam, H. J. Gogoi, R. P. Palathinkal, A. T. Mallajosyula International Conference on Condensed Matter and Device Physics (ICCMDP), Gandhinagar (2023)
  49. Analysis of ionic defects in hybrid perovskite memristors using deep level transient spectroscopy H. J. Gogoi*, A. B. Andrabi*, A. T. Mallajosyula 1st International Conference on Low-Energy Digital Devices and Computing (ICLED), Singapore (2023)
  50. Measurement process-dependent performance and conduction mechanism of hybrid perovskite memristors H. J. Gogoi, A. T. Mallajosyula nanoGe International Conference on Perovskite Memristors and Electronics (ICPME), oral (2021) · doi:10.29363/nanoge.icpme.2021.009
  51. High performance MAGeI₃:2D/3D-FASnI₃ hybrid perovskite tandem solar cells A. Purkayastha, A. B. Andrabi, A. T. Mallajosyula SSRN preprint (2024) · doi:10.2139/ssrn.4926406
  52. Insight into carbon nanotube surface structures for PV applications (invited) S. K. Doorn, N. F. Hartmann, N. K. Subbaiyan, R. Pramanik, A. T. Mallajosyula, A. Mohite, A.-M. Dowgiallo, J. L. Blackburn 229th Electrochemical Society Meeting Meeting Abstracts MA2016-01 (6), 560 (2016) · doi:10.1149/MA2016-01/6/560
  53. Insight into carbon nanotube surface structures for photovoltaics applications S. Doorn, N. Hartmann, N. Subbaiyan, R. Pramanik, A. Mallajosyula, A. Mohite, J. Blackburn 251st American Chemical Society National Meeting Abstracts of Papers of the ACS 251 (2016)
  54. Hysteresis-free large-area crystalline perovskite solar cells via temperature controlled doctor blading in ambient conditions G. Gupta, A. Mallajosyula, S. Bhatt, W. Nie, A. Mohite 251st American Chemical Society National Meeting Abstracts of Papers of the ACS 251 (2016)
  55. Origin of open circuit voltage in solar cells based on polymer wrapped carbon nanotubes and fullerenes A. T. Mallajosyula, G. Gupta, S. K. Doorn, A. Mohite 227th Electrochemical Society Meeting Meeting Abstracts MA2015-01 (4), 716 (2015) · doi:10.1149/MA2015-01/4/716
  56. A model for the optical simulation of triple junction solar cells A. Purkayastha, A. T. Mallajosyula Software copyright SW-17416/2023, granted 2023 (2023)
  57. A solar cell with improved light absorption capacity S. Sundar Kumar Iyer, A. T. Mallajosyula Indian Patent No. 344791, granted 2020 (2020)
  58. An improved organic optoelectronic device S. Sundar Kumar Iyer, R. Gurunath, A. T. Mallajosyula, B. K. Rajbongshi, G. Bhattacharjya, V. Jain Indian Patent No. 271903, granted 2016 (2016)